Geeetech New J-head hotend assembled with 0.3mm Nozzle Cartridge heater & 1m PTFE tubing for 3.0mm filament 3d printer extruder
|45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.|
Guarantees: On-time Delivery 60 days
The Bowden principle
The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use and importantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.
If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube’s other end is connected to the extruder’s hot-end.
The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.
The inner diameter of the bowden feed mouth is 4mm to print with 1.75mm filament,and 6mm to print with 3mm filament.
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.
Check the following specifications for the assembled heater.
Materail: Stainless Steel,PVC,Nylon
Wire Length :1m
Heater size: 6 x 15mm(D*L)
Specification of PTFE tubing
High and low temperture resistance
Good dielectric properties
The static friction coefficient is the smallest of plastic
The aging of the climate-resistant
1 x J-Head Hot End with 0.3mm Nozzle,Cartridge heater & PTFE tubing for 3.0mm filament
you may also like these:
Geeetech J-head hotend Hot end assembled with Heating wire & 0.35mm nozzle for 3.0mm ABS/PLA filament -RepRap Prusa Extruder
Geeetech assembled J-Head HotEnd with Cartridge heater & 0.3mm nozzle for 3.0mm ABS/PLA filament 3D printer RepRap Prusa Mendel
Geeetech New Long-Distance J-head Hotend with 0.4mm nozzle,PTFE for 1.75mm ABS/PLA filament -3D Printer Prusa Mendel Extruder
Geeetech 3D printer RepRap Short-distance J-Head Hot End Hotend 0.5mm nozzle for 1.75 mm ABS/PLA filament Prusa Mendel extruder
High Quality! Geeetech Newest Hot Sale New 3D controller – Geeetech Rumba+USB cable Free Shipping
Geeetech Rumba +cooler fan+LCD2004 controller+jumper wire ect for 3D printer kit board free shipping
3D Printer Kits-Smart LCD2004 Display, DRV8825 stepper motor driver,RAMPS1.4 Shield,Mega2560, Heatsink & SD Module…
Geeetech IOIO OTG Android Development Board Free Shipping
0 out of 5 (0 Ratings)
|Positive (0 %)||
4 Stars (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
3D printer parts Reprap all metal planetary motor direct/bowden extruder for 1.75 mm filament(NO planetary motor )
xc3dmaker 2016 Reprap mk9-e3d v6 12V 0.4mm Single Nozzle 1.75mm filament 3D Printer Head/Extruder Extra 0.3mm Nozzle
Wholesale 1pc 3D Printer Nozzle 0.3/0.4mm/0.5mm Optional Extruder Nozzle Print Head For 1.75mm MK8 3d printer accessories
US $0.94 / piece
3D printer parts Hotend double extruder head 0.35 nozzle suitable for diameter 3 mm material extrusion head
US $178.60 / piece
5pcs Copper Nozzle Mixed Sizes 0.2mm/0.3mm/0.4mm/0.5mm Extruder Print Head For 1.75MM ABS PLA MK8 Makerbot 3D Printer
US $4.59 / lot
3D printer accessory compact extruder 3D printer double print head extruder MK8 kossel rostock delta ultimaker
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.